In order to do that, press the bottom part down and then you're going to want to carefully pry off the top in order to take it away from the case.

Reattach the track, rescrew the screw, and voila.įor the inner case, you're going to want to take the ZL button off first. Unscrew the one phillips screw seen in order to safely remove the track, then move the release button over to your new case. Screw in the two remaining screws onto the board firmly but not too tight (otherwise the buttons won't press correctly), and then push the joystick back through the hole, screw in, and then do a quick feel test to make sure everything is secure but not too tight!įor your ZL button and track, set the front case off to the side and take the back tracking to start. Screw the minus wiring back in, and then insert the board and white block in as well within the new case. Don't forget the black ring around the joystick hole either, that needs to be moved as well! Everything needs to be aligned precisely, and then reattach the rubber covers. Take the rubber covers off of the buttons with your handy tweezers, pick them up and put them where they are supposed to be in the new case. the fun part, getting everything paired up with the new casing!

Nintendo switch joy con mods